WELDOR ENGINEERING PVT. LTD.

HYDRAULIC PRESS BRAKE

Hydraulic Press Brake

WELDOR Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machineries. Weldor Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of press Brake and are synchronized for parallelism between ram and table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload . All welding edges are properly machined for weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard 'V' Block & 'V' Punch and manually operated back gauge system which is front operated are supplied as standard accessories.

Standard accessories: Electric Motor, Control panel with Selection of INCH-ONCE-AUTO Mode of operation. Foot switch fine stroke Adjustment rod with limit Switches, Manual Back Gauge. Standard V-Block & punch, Manual Lubrication, Instruction Manual.

Optional accessories: Goose Neck punch & other tooling (Drawing required). NC Operated Back Gauge.

Note: Electricals are not under Warranty.

Capacities Available:

Send mail to weldor@weldor.com with questions or comments about this web site.
Copyright © 1998 WELDOR ENGINEERING PVT. LTD.
Last modified: August 06, 1998